POWER BACK DOOR TOUCH SENSOR INSTALLATION


  1. INSTALL POWER BACK DOOR TOUCH SENSOR ASSEMBLY


    1. Install the power back door touch sensor assembly with the 2 new power back door sensor clips.

    2. A01CF1A

      Install the 6 bolts.

    3. Connect the connector.

  2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    1. A01CEQ2E01

      Engage the 17 clips and install the back door trim board assembly.

    2. Install the 2 clips <A>.

  3. INSTALL SWITCH BEZEL


    1. A01CF0R

      Engage the 6 claws to install the switch bezel.

  4. INSTALL BACK DOOR INSIDE HANDLE


    1. A01CEZ1

      Engage the 4 claws to install the back door inside handle.

  5. INSTALL REAR WINDOW SIDE GARNISH LH


    1. A01CEXN

      Engage the 3 clips and 2 claws to install the rear window side garnish LH.

  6. INSTALL BACK DOOR NO. 2 SERVICE HOLE COVER


    1. A01CAW9

      Engage the 3 claws to install the back door No. 2 service hole cover.

  7. INSTALL REAR WINDOW SIDE GARNISH RH


    1. A01CC6D

      Engage the 3 clips and 2 claws to install the rear window side garnish RH.

  8. INSTALL BACK DOOR CENTER GARNISH


    1. A01CCZU

      Engage the 6 clips and 4 claws to install the back door center garnish.