Click here

POWER BACK DOOR CLOSER SWITCH REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE BACK DOOR CENTER GARNISH


    1. A01CDVZ

      Using a moulding remover C, disengage the 6 clips and 4 claws, and remove the back door center garnish.

  2. Click here

    REMOVE BACK DOOR NO. 2 SERVICE HOLE COVER


    1. A01CAW9

      Disengage the 3 claws and remove the back door No. 2 service hole cover.

  3. Click here

    REMOVE REAR WINDOW SIDE GARNISH LH


    1. A01CEXNE01

      Disengage the 3 clips and 2 claws, and remove the rear window side garnish LH.

  4. Click here

    REMOVE REAR WINDOW SIDE GARNISH RH


    1. A01CC6DE01

      Disengage the 3 clips and 2 claws, and remove the rear window side garnish RH.

  5. Click here

    REMOVE BACK DOOR INSIDE HANDLE


    1. A01CF6X

      Using a moulding remover, disengage the 4 claws as shown in the illustration and remove the back door inside handle.

  6. Click here

    REMOVE SWITCH BEZEL


    1. A01CF0R

      Disengage the 6 claws and remove the switch bezel.

  7. Click here

    REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A01CEQ2E01

      Using a clip remover, remove the 2 clips <A>.

    2. Disengage the 17 clips and remove the back door trim board assembly.

      Note: w/ Power Back Door:

      To prevent the parts from being damaged, make sure that the back door trim board assembly does not get caught on the power back door closer switch assembly during removal.

  8. Click here

    REMOVE POWER BACK DOOR CLOSER SWITCH


    1. A01CG05

      Disconnect the connector.

    2. A01CGJR

      Disengage the 2 claws and remove the power back door closer switch.