POWER BACK DOOR CONTROL SWITCH INSPECTION


  1. INSPECT POWER BACK DOOR CONTROL SWITCH (POWER SLIDE DOOR CONTROL SWITCH)

    A01CD6WE02

    1. Check that the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        6 (CSW) - 7 (E) Pushed (ON) Below 1 Ω
        6 (CSW) - 7 (E) Free (OFF) 10 kΩ or higher

        If the result is not as specified, replace the switch.

    2. Check that the switch illuminates.


      1. Apply battery voltage to the power back door control switch (power slide door control switch) and check that the switch illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (ILL+)

        Battery negative (-) → 2 (ILL-)

        		 Illuminates

        If the result is not as specified, replace the bulb.