BACK DOOR OPENER SWITCH INSPECTION


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. Check operation of the opener switch.


      1. A01CCG2E01

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Position Specified Condition
        2 (E) - 3 (UL) Back door opener switch assembly (opener switch) not pushed (OFF) 10 kΩ or higher
        2 (E) - 3 (UL) Back door opener switch assembly (opener switch) pushed (ON) Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.

    2. Check operation of the lock switch.


      1. A01CCLBE01

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Position Specified Condition
        1 (L) - 2 (E) Back door opener switch assembly (lock switch) not pushed (OFF) 10 kΩ or higher
        1 (L) - 2 (E) Back door opener switch assembly (lock switch) pushed (ON) Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.