POWER SLIDE DOOR TOUCH SENSOR INSTALLATION


  1. INSTALL POWER SLIDE DOOR TOUCH SENSOR ASSEMBLY


    1. A01CC9L

      Engage the 3 clips and claw, and install the power slide door touch sensor assembly.

    2. Engage the clamp.

    3. Connect the connector.

  2. INSTALL NO. 1 WITH BOX SPEAKER ASSEMBLY


    1. Engage the clamp and install the No. 1 with box speaker assembly with the 3 bolts.

    2. Connect the connector.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. Connect the connector.

    2. A01CG64

      Engage the 15 clips and 5 claws to install the rear door trim board to the slide door panel.

    3. Using a T25 "TORX" socket wrench, install the screw.