POWER SLIDE DOOR CONTROL SWITCH (for Instrument Panel Side) INSTALLATION


  1. INSTALL NO. 1 POWER SLIDE DOOR CONTROL SWITCH


    1. A01CELI

      Engage the 2 claws to install the No. 1 power slide door control switch.

  2. INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. Engage the 6 claws and 3 guides to install the No. 1 switch hole base.

      A01CFWGE01

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL


    1. A01CAYP

      Engage the 3 guides and 14 claws.

      Tech Tips

      Make sure that all claws around the entire circumference of the driver side knee airbag assembly are fully engaged.

      Note

      Make sure that the claws are fully engaged.

    2. A01CCKN

      Install the lower instrument panel finish panel with the 3 screws <B>.

    3. A01CC11

      Engage the 3 claws and the fuel lid lock control cable assembly.

    4. A01CC18

      Engage the 3 claws and the hood lock control cable assembly.

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01CE9Q

      Engage the 2 claws and DLC3.

    2. Engage the clamp.

    3. Connect the connector.

    4. A01CFFK

      Engage the 2 claws and 2 guides.

      Note

      Make sure that the claws are fully engaged.

    5. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <B>.

  5. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. A01CDHT

      Engage the 4 claws to install the No. 1 instrument cluster finish panel garnish.

  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL


    1. A01CEO2

      Engage the 11 claws and 2 guides to install the No. 1 instrument cluster finish panel.

    2. A01CDZ6E01

      Remove the protective tape from the steering column cover.

  7. INSTALL COWL SIDE TRIM BOARD


    1. A01CFL6

      Engage the 2 guides, claw and clip to install the cowl side trim board RH.

    2. Install the clip(A).