HOOD ON-VEHICLE INSPECTION


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas A through H are within each standard range.

      A01CF70E01
      Text in Illustration
      *A for ALPHARD *B for VELLFIRE
      Standard Clearance
      Area Measurement Area Measurement
      A 5.9 to 9.9 mm (0.232 to 0.390 in.) E 2.2 to 6.2 mm (0.0866 to 0.244 in.)
      B 3.4 to 7.4 mm (0.134 to 0.291 in.) F 2.3 to 6.3 mm (0.0906 to 0.248 in.)
      C 2.3 to 5.3 mm (0.0906 to 0.209 in.) G 2.3 to 5.3 mm (0.0906 to 0.209 in.)
      D -1.4 to 1.6 mm (-0.0551 to 0.0630 in.) H -1.4 to 1.6 mm (-0.0551 to 0.0630 in.)