POWER SLIDE DOOR MAIN SWITCH INSPECTION


  1. INSPECT POWER SLIDE DOOR MAIN SWITCH


    1. A01CFDGE04

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      G35-9 (UL) - G35-6 (E) Pushed 10 kΩ or higher
      G35-9 (UL) - G35-6 (E) OFF Below 1 Ω

      1. Apply battery voltage to the power slide door main switch and check that the illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → G35-8 (ILL+)

        Battery negative (-) → G35-7 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the power slide door main switch.