SLIDING ROOF SYSTEM SYSTEM DESCRIPTION


  1. GENERAL

    This system has the following functions: manual slide open and close; auto slide open and close; jam protection.

  2. FUNCTION OF MAIN COMPONENT

    Component Outline
    Sliding roof ECU (Sliding roof drive gear assembly) The sliding roof ECU (sliding roof drive gear assembly) controls sliding roof motor to rotate forward and backward, which slides sliding roof glass.

    Sliding roof switch (Power slide door control switch) (for front side)

    Sliding roof switch (Integration control and panel assembly) (for rear side)

    		 The sliding roof switch outputs operational signals to the sliding roof ECU (sliding roof drive gear assembly).

  3. SYSTEM OPERATION

    The sliding roof has the following features.

    Function Outline
    Manual slide open and close This function causes sliding roof to open (or close) when sliding roof switch is pressed for a maximum of 0.3 seconds. Sliding roof stops as soon as switch is released.
    Auto slide open and close This function causes sliding roof to fully open (or closed) when sliding roof switch is pressed for a minimum of 0.3 seconds.
    Jam protection function This function automatically stops sliding roof, or stops sliding roof and makes it open halfway (or fully tilts it upward) if a foreign object gets jammed in sliding roof during auto close operation.
    Sliding roof open warning When the engine switch is turned from on (IG) to off and the driver door is opened with the key in the cabin, the exterior lights off and the sliding roof open, the warning buzzer in the combination meter assembly sounds once. Then, multi-information display on the combination meter assembly displays "MOON ROOF OPENED".
    Window lock switch function When the window lock switch on the multiplex network master switch assembly is ON, sliding roof does not operate by pressing sliding roof switch.