Click here

WINDOW DEFOGGER WIRE REPAIR

Click here
Click here Click here
  1. Click here

    REPAIR REAR WINDOW DEFOGGER WIRE


    1. Clean the broken wire tips with a grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. A01CD33

      Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).

    4. Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note:

      Do not repair the rear window defogger wire again for at least 24 hours.