Click here

REAR POWER WINDOW SWITCH REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. Move the door inside handle knob to the lock position.

    2. A01CG64

      Using a T25 "TORX" socket wrench, remove the screw.

    3. Using a clip remover, disengage the 15 clips and 5 claws.

    4. Disconnect the connector and remove the rear door trim board sub-assembly.

  2. Click here

    REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A01CAPN

      Disengage the 2 claws and remove the rear power window regulator switch assembly.