LOWER INSTRUMENT PANEL DISASSEMBLY


  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01CC7M

      Using a clip remover, remove the 2 clips and instrument cluster finish panel sub-assembly.

  2. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY


    1. A01CC8D

      Disengage the claw and remove the glove compartment door stopper sub-assembly.

  3. REMOVE GLOVE BOX LIGHT ASSEMBLY


    1. A01CAP9

      Disconnect the connector.

    2. Disengage the guide and remove the glove box light assembly as shown in the illustration.

  4. REMOVE LOWER INSTRUMENT SIDE PATCH RH


    1. A01CG71

      Disengage the 3 claws and remove the lower instrument side patch RH.

  5. REMOVE LOWER INSTRUMENT SIDE PATCH LH

    Tech Tips

    Use the same procedure for the lower instrument side patch LH and lower instrument side patch RH.