COMPRESSOR (for 2GR-FE) INSPECTION


  1. INSPECT COMPRESSOR AND MAGNETIC CLUTCH (A/C LOCK SENSOR)


    1. A01CCWXE06

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 160 to 320 Ω

      If the resistance is not as specified, replace the compressor and magnetic clutch.

  2. INSPECT COMPRESSOR AND MAGNETIC CLUTCH (A/C COMPRESSOR SOLENOID)


    1. A01CFCKE33

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 1 20°C (68°F) 10 to 11 Ω

      If the resistance is not as specified, replace the compressor and magnetic clutch.

  3. INSPECT COMPRESSOR AND MAGNETIC CLUTCH


    1. A01CCWXE07

      Disconnect the connector from the compressor and magnetic clutch.

    2. A01CDXXE04

      Disconnect the connector from the magnetic clutch.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-3 - B-1 Always Below 1 Ω
      A-3 - Body ground Always 10 kΩ or higher

      If the resistance is not as specified, replace the compressor and magnetic clutch.

  4. INSPECT MAGNETIC CLUTCH


    1. A01CFPYE04

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Body ground 20°C (68°F) 3.8 to 4.2 Ω

      If the resistance is not as specified, replace the magnetic clutch.

    2. When connector terminal 1 is connected to the positive (+) battery terminal, check that the following occurs: 1) the magnetic clutch's operating sound can be heard, and 2) the magnetic clutch's hub and rotor lock.

      OK
      1)
      The magnetic clutch's operating sound can be heard.
      2)
      The magnetic clutch's hub and rotor lock.

      If the result is not as specified, replace the magnetic clutch.