COMPRESSOR (for 2GR-FE) DISASSEMBLY


  1. REMOVE MAGNETIC CLUTCH ASSEMBLY


    1. A01CCWEE01

      Place the compressor and magnetic clutch in a vise.

    2. Using SST, hold the magnetic clutch hub.

      SST
      09985-00270

    3. Remove the bolt, magnetic clutch hub, and magnetic clutch washers.

      Tech Tips

      There is no set number of magnetic clutch washers because they are used for adjustment.

    4. A01CB9S

      Using a snap ring expander, remove the snap ring and then remove the magnetic clutch rotor.

      Note

      Take care not to damage the seal cover of the bearing when removing the snap ring.

    5. A01CF55

      Disconnect the connector.

    6. Disengage the clamp.

    7. Remove the screw and the bracket.

    8. A01CBJV

      Using a snap ring expander, remove the snap ring and magnetic clutch stator.