BLOWER UNIT REASSEMBLY


  1. INSTALL HARNESS BRACKET


    1. A01CG32

      Install the harness bracket with the screw.

  2. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY


    1. A01CDPT

      Install the front blower motor sub-assembly with the 3 screws.

  3. INSTALL AIR INLET CONTROL SERVO MOTOR SUB-ASSEMBLY


    1. A01CB0T

      Install the air inlet control servo motor sub-assembly with the 3 screws.

  4. INSTALL CLEAN AIR FILTER


    1. A01CAQ9

      Install the clean air filter as shown in the illustration.

  5. INSTALL AIR FILTER COVER PLATE


    1. A01CG43

      Engage the 2 claws to install the air filter cover plate.

  6. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY


    1. A01CDIE

      Engage the 4 claws to install the No. 2 air duct sub-assembly.