Click here

REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for Manual Captain Seat) INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL REAR NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY


    1. A01CE2Y

      Install the rear No. 1 seat 3 point type belt assembly with the nut.

      42 N*m 428 kgf*cm 31 ft.*lbf
    2. A01CEWCE01

      Fold the seatback forward, and then recline it to the first lock position as shown in the illustration.

    3. A01CDR3E01

      Insert a pin punch into the zero point calibration hole of the reclining sensor.

    4. With the pin punch inserted, install the reclining sensor with the 3 nuts.

      4.5 N*m 46 kgf*cm 40 in.*lbf

    5. Remove the pin punch.

  2. Click here

    INSTALL NO. 2 REAR SEAT SHOULDER BELT HOLE COVER


    1. A01CALC

      Engage the 4 claws to install the No. 2 rear seat shoulder belt hole cover.

  3. Click here

    INSTALL REAR NO. 1 SEAT PROTECTOR


    1. A01CC36

      Engage the 4 hooks.

    2. Install the rear No. 1 seat protector with the clip.

  4. Click here

    INSTALL NO. 1 SEATBACK COVER WITH PAD


    1. Temporarily install the No. 1 seatback cover with pad to the rear No. 1 seatback frame sub-assembly.

    2. A01CC2G

      Engage the 4 claws to install the 2 rear seat headrest supports.

    3. A01CAPJE01

      Close the 2 fasteners.

    4. Using hog ring pliers, install the No. 1 seatback cover with pad with 3 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  5. Click here

    INSTALL REAR SEAT SHOULDER BELT COVER


    1. A01CCKP

      Install the rear seat shoulder belt cover with the 2 screws.

  6. Click here

    INSTALL REAR SHOULDER BELT ANCHOR COVER


    1. A01CG8A

      Engage the 4 claws to install the rear shoulder belt anchor cover.

  7. Click here

    INSTALL FRONT SHOULDER BELT ANCHOR COVER


    1. A01CFKZ

      Engage the guide.

    2. Engage the 2 claws to install the front shoulder belt anchor cover.

  8. Click here

    INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY LH


    1. A01CBGR

      Install the rear seat armrest assembly LH with the bolt.

      32 N*m 326 kgf*cm 24 ft.*lbf
  9. Click here

    INSTALL REAR SEAT ARMREST HOLE COVER LH


    1. A01CC6W

      Engage the 3 claws to install the rear seat armrest hole cover LH.

  10. Click here

    INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY RH


    1. A01CAWE

      Install the rear seat armrest assembly RH with the bolt.

      32 N*m 326 kgf*cm 24 ft.*lbf
  11. Click here

    INSTALL REAR SEAT ARMREST HOLE COVER RH


    1. A01CB8G

      Engage the 3 claws to install the rear seat armrest hole cover RH.

  12. Click here

    INSTALL NO. 1 SEAT CUSHION COVER WITH PAD


    1. A01CFE0

      Engage the 5 hooks.

    2. A01CG9T

      Engage the 7 hooks.

    3. A01CEK4

      Engage the 3 hooks to install the No. 1 seat cushion cover with pad.

  13. Click here

    INSTALL NO. 6 REAR SEAT LEG SIDE COVER


    1. A01CGGI

      Engage the claw.

    2. Install the No. 6 rear seat leg side cover with the screw.

  14. Click here

    INSTALL NO. 5 REAR SEAT LEG SIDE COVER


    1. A01CBHI

      Engage the claw.

    2. Install the No. 5 rear seat leg side cover with the screw.

  15. Click here

    INSTALL LOWER REAR SEAT LEG COVER


    1. A01CBMA

      Engage the 6 claws.

    2. Install the lower rear seat leg cover with the 2 screws.

  16. Click here

    INSTALL NO. 3 REAR SEAT LEG SIDE COVER


    1. A01CC94

      Engage the 2 claws and guide to install the No. 3 rear seat leg side cover.

  17. Click here

    INSTALL NO. 2 REAR SEAT LEG SIDE COVER


    1. A01CG3A

      Engage the 2 claws and guide to install the No. 2 rear seat leg side cover.

  18. Click here

    INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY


    1. A01CCAHE01

      Install the rear No. 1 seat inner belt assembly with the bolt and washer.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the rear No. 1 seat inner belt assembly to overlap the protruding parts of the rear No. 1 seat spring assembly.

    2. A01CD3I

      Connect the 2 seat track control cables.

  19. Click here

    INSTALL NO. 1 REAR SEAT RECLINING COVER LH


    1. A01CEYV

      Engage the 3 guides and the 4 claws.

    2. Install the No. 1 rear seat reclining cover LH with the screw.

  20. Click here

    INSTALL REAR SEAT SIDE TABLE ASSEMBLY (for RH Side)


    1. A01CAU7

      Install the rear seat side table assembly with the 4 nuts.

      19 N*m 194 kgf*cm 14 ft.*lbf
  21. Click here

    INSTALL REAR SEAT SIDE TABLE LEG COVER (for RH Side)


    1. A01CEMM

      Install the rear seat side table leg cover with the 2 screws.

  22. Click here

    INSTALL NO. 2 REAR SEAT RECLINING COVER


    1. A01CCYX

      Engage the 2 claws and clip.

    2. Engage the hook to install the No. 2 rear seat reclining cover.

  23. Click here

    CONNECT REAR NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY


    1. A01CBZ9E01

      Connect the rear No. 1 seat 3 point type belt assembly with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the rear No. 1 seat 3 point type belt assembly to overlap the protruding parts of the cushion frame.

  24. Click here

    INSTALL NO. 1 REAR SEAT RECLINING COVER RH


    1. A01CBL7

      Connect the 4 cable clamps.

    2. Engage the 4 claws and 2 guides.

    3. Install the No. 1 rear seat reclining cover with the 4 screws.

  25. Click here

    INSTALL REAR SEAT CUSHION


    1. A01CD6P

      Install the rear seat cushion with the screw.

  26. Click here

    INSTALL NO. 3 RECLINING ADJUSTER INSIDE COVER


    1. A01CGH2

      Engage the 3 claws and 2 clips.

    2. Engage the hook to install the No. 3 reclining adjuster inside cover.

  27. Click here

    INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE


    1. A01CBTE

      Engage the claw to install the No. 2 reclining adjuster release handle.

  28. Click here

    INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    1. A01CG0L

      Engage the claw to install the No. 1 reclining adjuster release handle.

  29. Click here

    INSTALL REAR NO. 1 SEAT ASSEMBLY


    1. Place the rear No. 1 seat assembly in the cabin.

      Note:

      Be careful not to damage the vehicle body.

    2. A01CE9FE01

      Temporary install the rear No. 1 seat assembly with the 4 bolts.

    3. Tighten the bolt (1).

      50 N*m 510 kgf*cm 37 ft.*lbf

    4. Tighten the bolt (2).

      50 N*m 510 kgf*cm 37 ft.*lbf

    5. Slide the rear No. 1 seat assembly rearward.

    6. Tighten the bolt (3).

      50 N*m 510 kgf*cm 37 ft.*lbf

    7. Slide the rear No. 1 seat assembly inward.

    8. Tighten the bolt (4).

      50 N*m 510 kgf*cm 37 ft.*lbf
      Note:

      During the sliding operation of the rear No. 1 seat assembly, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat fixation bolts to adjust the adjuster position.

    9. A01CDBN

      Engage the 6 claws to close the 2 covers.

    10. A01CC3Y

      Engage the 4 claws to close the 2 covers.

  30. Click here

    INSTALL REAR SEAT LOWER CUSHION SHIELD


    1. A01CD5A

      Engage the guide.

    2. Engage the claw to install the rear seat lower cushion shield as shown in the illustration.

  31. Click here

    INSTALL REAR SEAT HEADREST ASSEMBLY