REAR CONTROL SWITCH REMOVAL


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY

    Click here

  2. REMOVE REAR SEAT SIDE TABLE COVER (for RH Side)


    1. A01CBNUE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the claw and guide, and remove the rear seat side table cover.

  3. REMOVE NO. 2 SEAT SIDE ADJUSTER COVER CAP (for RH Side)


    1. A01CDMLE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 2 claws and 2 guides to remove the No. 2 seat side adjuster cover cap.

  4. REMOVE REAR SEAT SIDE TABLE BOARD (for RH Side)


    1. A01CDUH

      Disengage the 6 clips to remove the rear seat side table board.

  5. REMOVE REAR SEAT SIDE TABLE (for RH Side)


    1. A01CB31

      Remove the 2 nuts, 2 bolts and rear seat side table.

  6. REMOVE NO. 1 SEAT SIDE ADJUSTER COVER CAP (for RH Side)


    1. A01CG2KE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 2 claws to remove the 2 No. 1 seat side adjuster cover caps.

  7. REMOVE SEAT ADJUSTER COVER CAP LH


    1. A01CC31

      Disengage the 6 claws and 4 guides to remove the seat adjuster cover cap LH.

  8. REMOVE NO. 3 SEAT ADJUSTER COVER CAP


    1. A01CC0WE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the claw and guide to remove the No. 3 seat adjuster cover cap.

  9. REMOVE NO. 4 SEAT ADJUSTER COVER CAP


    1. A01CG67E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the claw and guide to remove the No. 4 seat adjuster cover cap.

  10. REMOVE REAR SEAT CUSHION MOULDING


    1. A01CGEN

      Remove the 2 bolts.

    2. Disengage the 5 claws.

    3. Disengage the 4 clips.

    4. Disengage the 2 guides to remove the rear seat cushion moulding.

  11. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY


    1. A01CBHW

      Remove the bolt, washer and rear No. 1 seat inner belt assembly.

  12. REMOVE REAR SEAT ARMREST ASSEMBLY


    1. A01CB68

      Remove the 2 bolts.

    2. Disengage the guide to remove the rear seat armrest assembly.

  13. REMOVE REAR POWER SEAT SWITCH WITH CUP HOLDER ASSEMBLY


    1. Disconnect the connector and disengage the 2 clamps.

    2. A01CEIG

      Remove the 3 bolts, 2 screws and rear power seat switch with cup holder assembly.

  14. REMOVE REAR POWER SEAT SWITCH


    1. A01CCRR

      Remove the 3 screws.

    2. A01CEWP

      Disengage the 5 guides and remove the rear power seat switch with rear lower armrest base sub-assembly.

    3. A01CG4S

      Remove the 4 screws.

    4. Open the rear lower armrest base sub-assembly.

    5. A01CG8X

      Disengage the wire harness clamp as shown in the illustration.

    6. Disengage the 4 claws and remove the rear power seat switch from the rear lower armrest base sub-assembly as shown in the illustration.