Click here

SEAT MEMORY SWITCH INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL SEAT MEMORY SWITCH


    1. A01CE6I

      Engage the 4 claws to install the seat memory switch.

    2. A01CBBR

      Engage the 4 claws.

    3. Install the front door inner glass weatherstrip base with the 2 screws.

  2. Click here

    INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01CBI8

      Engage the 9 claws to install the front door inner glass weatherstrip as shown in the illustration.

  3. Click here

    INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. for Driver Side with Memory:


      1. Connect the connector.

    2. A01CCLL

      Engage the 12 clips and install the front door trim board sub-assembly to the front door panel.

    3. Install the 2 screws.

  4. Click here

    INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. A01CF7S

      Engage the 9 claws to install the power window regulator master switch assembly with front door armrest base panel.

  5. Click here

    INSTALL FRONT DOOR PULL HANDLE


    1. A01CDYE

      Engage the 3 claws.

    2. Install the front door pull handle with the screw.

    3. A01CCQE

      Engage the claw and close the cover.

  6. Click here

    INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01CCM7E01

      Engage the claw to install the courtesy light assembly.

  7. Click here

    INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01CBSH

      Engage the 3 claws to install the front door inside handle bezel plug.

  8. Click here

    INSTALL LOWER DOOR FRAME GARNISH


    1. A01CFQ1

      Engage the 3 clips to install the lower door frame garnish.

  9. Click here

    INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    1. A01CBQR

      Engage the guide and 2 clips to install the front door lower frame bracket garnish.