SEAT MEMORY SWITCH INSPECTION


  1. INSPECT SEAT MEMORY SWITCH


    1. A01CCS4E02

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance (for RHD)
      Tester Connection Switch Condition Specified Condition
      e1-4 (M1) - e1-8 (E) M1 switch pressed Below 1 Ω
      e1-2 (M2) - e1-8 (E) M2 switch pressed Below 1 Ω
      e1-1 (M3) - e1-8 (E) M3 switch pressed Below 1 Ω
      e1-5 (MRY) - e1-8 (E) SET switch pressed Below 1 Ω
      Standard Resistance (for LHD)
      Tester Connection Switch Condition Specified Condition
      e1-4 (M1) - e1-8 (E) M1 switch pressed Below 1 Ω
      e1-2 (M2) - e1-8 (E) M2 switch pressed Below 1 Ω
      e1-1 (M3) - e1-8 (E) M3 switch pressed Below 1 Ω
      e1-5 (MRY) - e1-8 (E) SET switch pressed Below 1 Ω

      If the result is not as specified, replace the seat memory switch.