Click here

REAR NO. 2 SEAT ASSEMBLY INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Temporary install the rear No. 2 seat assembly.

      Note:

      Do not damage the rear No. 2 seat assembly, body or body interior.

    2. Connect the rear No. 2 seat outer belt assembly.

    3. A01CBYV

      Temporary tighten the 2 nuts.

    4. Lock the inner leg in the inner rail.

    5. A01CD6M

      Remove the clip of the seat track upper rail cover.

    6. A01CBU5

      Temporary install the seat track upper rail cover.

    7. Adjust the rear No. 2 seat assembly so that the positioning marks are aligned as shown in the illustration.

    8. A01CGJHE01

      As shown in the illustration, tighten the nut while pushing the rear No. 2 seat assembly towards the outside of the vehicle.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      • If this operation is difficult to perform alone, use two or more people.

      • Make sure not to misalign the positioning marks when pushing the seat.

      • If the nut is tightened without the seat pushed towards the outside of the vehicle, the inner lock may not operate normally.

    9. Remove the seat track upper rail cover.

    10. A01CBR7E01

      As shown in the illustration, tighten the nut while pushing the rear No. 2 seat assembly towards the outside of the vehicle, and install the rear No. 2 seat assembly.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      • If this operation is difficult to perform alone, use two or more people.

      • Make sure not to misalign the positioning marks when pushing the seat.

      • If the nut is tightened without the seat pushed towards the outside of the vehicle, the inner lock may not operate normally.

      • After reassembling the seat, check that the inner lock operates normally and that the inner lock and lock cover do not interfere with each other.

    11. Check that the rear No. 2 seat flips up and slides smoothly. If abnormal, loosen the 2 nuts and perform operations starting from step (f) again.

    12. A01CGCJE01

      Remove the 2 stopper bolts in the order indicated in the illustration.

      Note:

      Before removing the stopper bolts, make sure that the inner leg is securely locked in the inner rail.

  2. Click here

    INSTALL NO. 2 SEAT HEADREST ASSEMBLY

  3. Click here

    INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

  4. Click here

    INSTALL NO. 1 SEAT TRACK LOCK PLATE COVER


    1. A01CDSK

      Engage the 2 claws and guide to install the No. 1 seat track lock plate cover.

  5. Click here

    INSTALL UPPER SEAT TRACK RAIL COVER


    1. A01CFZ1

      Engage the 2 claws to install the grommet.

    2. A01CEBQ

      Install the clip of the seat track upper rail cover.

    3. A01CC1F

      Engage the 2 guides.

    4. Engage the 5 claws and clip to install the upper seat track rail cover.

  6. Click here

    INSTALL RECLINING ADJUSTER RELEASE HANDLE


    1. A01CELJ

      Engage the claw to install the reclining adjuster release handle.