REAR NO. 1 SEAT ASSEMBLY (for Luxury Type Power Seat) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT LOWER CUSHION SHIELD


    1. A01CCDI

      Disengage the claw and guide, and remove the rear seat lower cushion shield as shown in the illustration.

  3. REMOVE REAR SEAT LEG COVER


    1. A01CEVN

      Disengage the 5 claws and guide to remove the rear seat leg cover.

  4. REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. Operate the rear power seat switch to fully raise the ottoman.

    2. A01CAUUE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 6 claws and open the 2 covers as shown in the illustration.

    3. A01CDAHE03
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 6 claws and open the 2 covers as shown in the illustration.

    4. Operate the rear power seat switch and move the seatback to the fully reclined position.

    5. A01CCPR

      Remove the 4 bolts.

    6. Remove the nut and disconnect the wiring harness protector set.

    7. Disconnect the connector.

    8. Remove the rear No. 1 seat assembly.

      Note

      Be careful not to damage the vehicle body.