REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  3. REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. A01CFQZE01

      Using a screwdriver wrapped with protective tape, disengage the 3 claws and open the cover as shown in the illustration.

    2. A01CAT6E01

      Using a screwdriver wrapped with protective tape, disengage the 3 claws and open the cover as shown in the illustration.

    3. A01CFU4E01

      Using a screwdriver wrapped with protective tape, disengage the claw and open the cover as shown in the illustration.

    4. A01CBE6E01

      Using a screwdriver wrapped with protective tape, disengage the claw and open the cover as shown in the illustration.

    5. A01CFIG

      Remove the 4 bolts and rear No. 1 seat assembly.

      Note

      Be careful not to damage the vehicle body.