Click here

REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) DISASSEMBLY

Click here
Click here Click here
  1. Click here

    REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    1. A01CCK7E01

      Using a screwdriver wrapped with protective tape, disengage the claw and remove the No. 1 reclining adjuster release handle.

  2. Click here

    REMOVE SEAT TRACK HANDLE CONTROL LEVER


    1. A01CFG5E01

      Using a screwdriver wrapped with protective tape, disengage the claw and remove the seat track handle control lever.

  3. Click here

    REMOVE NO. 1 REAR SEAT RECLINING COVER RH


    1. A01CCXG

      Remove the 2 screws.

    2. Disengage the 4 claws and the 3 guides, and remove the No. 2 rear seat reclining cover RH with the rear seat cushion shield RH.

  4. Click here

    REMOVE REAR SEAT CUSHION SHIELD RH


    1. A01CFOX

      Disengage the 2 claws and remove the rear seat cushion shield RH from the No. 2 rear seat reclining cover RH.

      Note:

      To avoid damage to the claws, only remove the rear seat cushion shield RH when it or the No. 2 rear seat reclining cover RH needs to be replaced.

  5. Click here

    REMOVE SEAT ADJUSTER COVER CAP


    1. A01CCESE01

      Using a screwdriver wrapped with protective tape, disengage the claw and the guide, and remove the seat adjuster cover cap.

  6. Click here

    REMOVE REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY


    1. A01CG47

      Remove the bolt, washer and rear No. 1 center seat lap type belt assembly.

  7. Click here

    REMOVE NO. 1 REAR SEAT RECLINING COVER LH


    1. A01CF1P

      Remove the 2 screws.

    2. Disengage the 6 claws and the 3 guides, and remove the No. 1 rear seat reclining cover LH with the rear seat cushion shield LH.

  8. Click here

    REMOVE REAR SEAT CUSHION SHIELD LH


    1. A01CDHM

      Disengage the 2 claws and remove the rear seat cushion shield LH from the No. 1 rear seat reclining cover LH.

      Note:

      To avoid damage to the claws, only remove the rear seat cushion shield LH when it or the No. 1 rear seat reclining cover LH needs to be replaced.

  9. Click here

    REMOVE NO. 1 SEAT CUSHION COVER WITH PAD


    1. A01CF96

      Remove the 4 bolts, bush, and No. 1 seat cushion cover with pad.

  10. Click here

    REMOVE LOWER REAR SEAT CUSHION SHIELD


    1. A01CC3K

      Remove the screw.

    2. Disengage the claw and the guide, and remove the lower rear seat cushion shield.

  11. Click here

    REMOVE SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY


    1. A01CBHU

      Remove the 2 screws.

    2. Disengage the guide.

    3. A01CAMW

      Disengage the 2 cable clamps and remove the seat cushion lock release lever assembly.

  12. Click here

    REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY


    1. A01CE97

      Open the 2 fasteners.

    2. A01CBFJ

      Remove the rear seat cushion frame sub-assembly from the No. 1 seat cushion cover with pad.

  13. Click here

    REMOVE REAR NO. 1 SEAT LOCK INNER CABLE ASSEMBLY


    1. A01CCDN

      Remove the clamp.

    2. Disengage the 2 cable clamps and remove the rear No. 1 seat lock inner cable assembly.

  14. Click here

    REMOVE NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY


    1. A01CCSJ

      Remove the 6 hog rings and No. 1 seat cushion cover sub-assembly.

  15. Click here

    REMOVE NO. 2 REAR SEAT SUPPORT CUSHION


    1. A01CC0L

      Remove the 2 screws and 2 No. 2 rear seat support cushions.

  16. Click here

    REMOVE REAR SEAT CUSHION UNDER COVER


    1. A01CDCB

      Disengage the 3 guides and remove the rear seat cushion under cover.

  17. Click here

    REMOVE REAR SEATBACK LOCK STRIKER COVER


    1. A01CCLF

      Using a screw driver wrapped with protective tape, disengage the 3 claws and remove the rear seatback lock striker cover.

  18. Click here

    REMOVE REAR SEAT INNER BELT COVER


    1. A01CGBD

      Disengage the claw and open the cover as shown in the illustration.

    2. Remove the 4 screws.

    3. Disengage the 2 guides and remove the rear seat inner belt cover.

  19. Click here

    REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY


    1. A01CBY0

      Remove the bolt.

    2. A01CD24

      Disengage the snap button and remove the rear No. 1 seat inner belt assembly.

  20. Click here

    DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY


    1. A01CG7N

      Remove the bolt and disconnect the floor end of the rear seat 3 point type belt assembly.

    2. A01CEMWE01

      Remove the floor anchor part of the rear seat 3 point type belt assembly from the rubber band.

  21. Click here

    REMOVE REAR SEAT RECLINING INNER REAR COVER RH


    1. A01CC38

      Remove the screw.

    2. Disengage the 2 claws and remove the rear seat reclining inner rear cover RH.

  22. Click here

    REMOVE REAR SEAT RECLINING INNER FRONT COVER RH


    1. A01CAWD

      Remove the 3 screws and remove the rear seat reclining inner front cover RH.

  23. Click here

    REMOVE REAR SEAT ARMREST HOLE COVER


    1. A01CCBE

      Using a moulding remover, disengage the 2 claws and remove the rear seat armrest hole cover.

  24. Click here

    REMOVE REAR NO. 1 SEAT ARMREST ASSEMBLY


    1. A01CDKX

      Remove the bolt, wave washer and washer, and rear No. 1 seat armrest assembly.

  25. Click here

    REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. A01CEQS

      Remove the 5 hog rings.

    2. A01CCZQ

      Open the fastener.

    3. A01CDS0

      Remove the 2 nuts and rear seat center armrest assembly.

  26. Click here

    REMOVE CUP HOLDER ASSEMBLY


    1. A01CF8Z

      Disengage the 4 claws and remove the cup holder assembly.

  27. Click here

    REMOVE REAR SEATBACK HINGE COVER


    1. A01CE8Y

      Remove the bolt and bush.

    2. Separate the pin and remove the rear seatback hinge cover.

  28. Click here

    REMOVE REAR SEAT CENTER ARMREST HINGE


    1. A01CBF5

      Remove the bush.

    2. Disengage the 4 claws and remove the rear seat center armrest hinge.

  29. Click here

    REMOVE SHOULDER BELT ANCHOR COVER


    1. A01CGIF

      Disengage the 4 claws and remove the shoulder belt anchor cover with rear seat shoulder belt cover.

    2. A01CCVJ

      Disengage the 2 claws and remove the shoulder belt anchor cover.

  30. Click here

    REMOVE REAR SEAT SHOULDER BELT COVER


    1. A01CD7E

      Remove the rear seat shoulder belt cover from the rear seat 3 point type belt assembly.

  31. Click here

    REMOVE NO. 1 SEATBACK COVER WITH PAD


    1. A01CE9S

      Remove the 10 hog rings.

    2. A01CE96

      Disengage the 8 claws and remove the 4 rear seat headrest supports.

    3. Remove the No. 1 seatback cover with pad.

  32. Click here

    REMOVE NO. 1 SEATBACK COVER SUB-ASSEMBLY


    1. A01CE4N

      Remove the 8 hog rings and No. 1 seatback cover sub-assembly.

  33. Click here

    REMOVE SEAT CUSHION SPRING DAMPER


    1. A01CDTU

      Remove the 2 nuts.

    2. Disengage the 2 guides and remove the seat cushion spring damper.

  34. Click here

    REMOVE NO. 3 REAR SEAT RECLINING COVER LH


    1. A01CG31

      Remove the 4 screws.

    2. Disengage the 4 claws and the guide, and remove the No. 3 rear seat reclining cover LH.

  35. Click here

    REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY


    1. A01CDL1

      Disengage the 2 claws and open the cover.

    2. A01CG1TE01

      Remove the 3 nuts <B> and disconnect the reclining sensor.

    3. Remove the nut <A> and rear seat 3 point type belt assembly.

  36. Click here

    REMOVE REAR SEATBACK LOCK LOWER BEZEL


    1. A01CFC0

      Disengage the 2 claws and the guide, and remove the rear seatback lock lower bezel.

  37. Click here

    REMOVE RECLINING ADJUSTER INSIDE OUTER COVER RH


    1. A01CCBC

      Remove the screw.

    2. Disengage the guide and remove the reclining adjuster inside outer cover RH.

  38. Click here

    REMOVE RECLINING ADJUSTER INSIDE REAR INNER COVER RH


    1. A01CDAW

      Disengage the 2 claws and remove the reclining adjuster inside rear inner cover RH.

  39. Click here

    REMOVE RECLINING ADJUSTER INSIDE FRONT INNER COVER RH


    1. A01CG68

      Remove the screw and reclining adjuster inside front inner cover RH.

  40. Click here

    REMOVE SEAT RECLINING ADJUSTER INSIDE REAR COVER


    1. A01CELC

      Disengage the 2 claws and remove the seat reclining adjuster inside rear cover.

  41. Click here

    REMOVE SEAT RECLINING ADJUSTER INSIDE FRONT COVER


    1. A01CBLN

      Disengage the 2 claws and remove the seat reclining adjuster inside front cover.

  42. Click here

    REMOVE RECLINING CONTROL LEVER


    1. A01CEQT

      Remove the 2 bolts and reclining control lever.

  43. Click here

    REMOVE REAR NO. 1 SEAT LOCK OUTER CABLE ASSEMBLY


    1. A01CDBF

      Disengage the 4 cable clamps and remove the rear No. 1 seat lock outer cable assembly.

  44. Click here

    REMOVE RECLINING ADJUSTING CABLE ASSEMBLY


    1. A01CBO0

      Disengage the 4 cable clamps and remove the reclining adjusting cable assembly.

  45. Click here

    REMOVE NO. 1 SEATBACK FRAME SUB-ASSEMBLY


    1. A01CFIX

      Remove the 3 bolts and seat hinge plate.

    2. A01CCWN

      Remove the bush.

    3. A01CETVE01

      Using a T55 "TORX" socket, remove the 2 bolts <A>.

    4. Remove the 2 bolts <B> and No. 1 seatback frame sub-assembly.

    5. Remove the No. 3 rear seat reclining cover LH.