Click here

REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) REASSEMBLY

Click here
Click here Click here
  1. Click here

    INSTALL NO. 1 SEATBACK FRAME SUB-ASSEMBLY


    1. A01CG4E

      Install the No. 1 seatback frame sub-assembly with the 4 bolts.

      55 N*m 561 kgf*cm 41 ft.*lbf
  2. Click here

    INSTALL REAR NO. 1 SEAT LOCK OUTER CABLE ASSEMBLY


    1. A01CCQH

      Engage the 4 cable clamps to install the rear No. 1 seat lock outer cable assembly.

  3. Click here

    INSTALL RECLINING CONTROL LEVER


    1. A01CE1A

      Install the reclining control lever with the 2 bolts.

      8.0 N*m 82 kgf*cm 71 in.*lbf
  4. Click here

    INSTALL RECLINING ADJUSTER INSIDE FRONT COVER LH


    1. A01CGB5

      Install the reclining adjuster inside front cover LH with the screw.

  5. Click here

    INSTALL RECLINING ADJUSTER INSIDE REAR COVER LH


    1. A01CC0V

      Engage the 2 claws to install the reclining adjuster inside rear cover LH.

  6. Click here

    INSTALL SEAT RECLINING ADJUSTER INSIDE FRONT COVER RH


    1. A01CEN4

      Install the seat reclining adjuster inside front cover RH with the screw.

  7. Click here

    INSTALL SEAT RECLINING ADJUSTER INSIDE REAR COVER RH


    1. A01CAWC

      Engage the 2 claws to install the seat reclining adjuster inside rear cover RH.

  8. Click here

    INSTALL RECLINING ADJUSTER INSIDE OUTER COVER LH


    1. A01CEON

      Engage the guide.

    2. Install the reclining adjuster inside outer cover LH with the screw.

  9. Click here

    INSTALL RECLINING ADJUSTER INSIDE OUTER COVER RH


    1. A01CCN8

      Engage the 2 guides.

    2. Install the reclining adjuster inside outer cover RH with the screw.

  10. Click here

    INSTALL SEAT CUSHION SPRING DAMPER


    1. A01CC8O

      Engage the 2 guides.

    2. Install the seat cushion spring damper with the 2 nuts.

      19 N*m 194 kgf*cm 14 ft.*lbf
  11. Click here

    INSTALL NO. 1 SEATBACK COVER SUB-ASSEMBLY


    1. A01CAUG

      Using hog ring pliers, install the No. 1 seatback cover sub-assembly to the No. 1 seatback pad with 6 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  12. Click here

    INSTALL NO. 1 SEATBACK COVER WITH PAD


    1. Temporarily install the No. 1 seatback cover with pad to the front seat frame.

    2. A01CG3WE01

      Using hog ring pliers, install the fasten rubber with 3 new hog rings.

    3. A01CBGP

      Engage the 4 claws to install the 2 rear seat headrest supports.

    4. A01CFOR

      Close the fastener.

    5. A01CDAP

      Using hog ring pliers, install the No. 1 seatback cover with pad with 3 new hog rings.

  13. Click here

    INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY


    1. A01CD5N

      Install the rear No. 1 seat armrest assembly with the bolt, wave washer and washer.

      24 N*m 245 kgf*cm 18 ft.*lbf
  14. Click here

    INSTALL REAR SEAT ARMREST HOLE COVER


    1. A01CARD

      Engage the 2 claws to install the rear seat armrest hole cover.

  15. Click here

    INSTALL REAR SEAT INNER BELT COVER


    1. A01CCDZ

      Insert the 2 guides.

    2. Install the rear seat inner belt cover with 3 screws.

    3. Engage the claw to close the cover as shown in the illustration.

  16. Click here

    INSTALL REAR SEATBACK LOCK STRIKER COVER


    1. A01CC7J

      Engage the 3 claws to install the rear seatback lock striker cover.

  17. Click here

    INSTALL REAR SEAT CUSHION UNDER COVER


    1. A01CFD5

      Engage the 2 guides to install the rear seat cushion under cover.

  18. Click here

    INSTALL NO. 2 REAR SEAT SUPPORT CUSHION


    1. A01CDK9

      Install the No. 2 rear seat support cushions with the 2 screws.

  19. Click here

    INSTALL NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY


    1. A01CEUD

      Using hog ring pliers, install the No. 1 seat cushion cover sub-assembly to the No. 1 seat cushion pad sub-assembly with 6 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  20. Click here

    INSTALL REAR NO. 1 SEAT LOCK INNER CABLE ASSEMBLY


    1. A01CCMY

      Engage the 2 cable clamps to install the No. 1 seat lock inner cable assembly.

    2. Install the new clamps.

  21. Click here

    INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY


    1. A01CGC4

      Install the rear seat cushion frame sub-assembly to the No. 1 seat cushion cover with pad.

    2. A01CCDF

      Close the fastener.

  22. Click here

    INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY


    1. A01CDU1

      Engage the 2 cable clamps to connect the rear No. 1 seat lock cable.

    2. A01CBCN

      Insert the guide.

    3. Install the seat cushion lock release lever assembly with the 2 screws.

  23. Click here

    INSTALL LOWER REAR SEAT CUSHION SHIELD


    1. A01CB7D

      Engage the guide and the claw.

    2. Install the lower rear seat cushion shield with the screw.

  24. Click here

    INSTALL NO. 1 SEAT CUSHION COVER WITH PAD


    1. A01CDP7E01

      Install the No. 1 seat cushion cover with pad with the 4 bolts and the bush.

      Bolt <A>
      32 N*m 326 kgf*cm 24 ft.*lbf
      Bolt <B>
      8.0 N*m 82 kgf*cm 71 in.*lbf
  25. Click here

    INSTALL REAR SEAT CUSHION SHIELD RH


    1. A01CCHQ

      Engage the 2 claws to install the rear seat cushion shield RH to the No. 2 rear seat reclining cover RH.

  26. Click here

    INSTALL NO. 2 REAR SEAT RECLINING COVER RH


    1. A01CCP7

      Insert the 3 guides.

    2. Engage the 5 claws.

    3. Install the No. 2 rear seat reclining cover RH with the 2 screws.

  27. Click here

    INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY


    1. A01CG50E01

      Install the rear No. 1 seat inner belt assembly with the bolt and washer.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the rear No. 1 seat inner belt assembly to overlap the protruding parts of the floor panel.

  28. Click here

    INSTALL SEAT ADJUSTER COVER CAP


    1. A01CFQ9

      Engage the guide and the claw to install the seat adjuster cover cap.

  29. Click here

    INSTALL REAR SEAT CUSHION SHIELD LH


    1. A01CG9K

      Engage the 2 claws to install the rear seat cushion shield LH to the No. 2 rear seat reclining cover LH.

  30. Click here

    INSTALL NO. 2 REAR SEAT RECLINING COVER LH


    1. A01CD45

      Insert the 3 guides.

    2. Engage the 4 claws.

    3. Install the No. 2 rear seat reclining cover LH with the 2 screws.

  31. Click here

    INSTALL SEAT TRACK HANDLE CONTROL LEVER


    1. A01CCDC

      Engage the claw to install the seat track handle control lever.

  32. Click here

    INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    1. A01CD61

      Engage the claw to install the No. 1 reclining adjuster release handle.