REAR NO. 1 SEAT ASSEMBLY (for Power Seat) INSTALLATION


  1. INSTALL REAR NO. 1 SEAT ASSEMBLY


    1. Place the rear No. 1 seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Temporary install the rear No. 1 seat assembly with the 4 bolts.

    3. A01CCPRE01

      Install the rear No. 1 seat assembly with the 4 bolts.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

      Note

      Tighten the bolts in the order indicated in the illustration.

    4. Install the wiring harness protector set with the nut.

    5. Connect each connector.

    6. A01CDBN

      Engage the 6 claws to close the 2 covers as shown in the illustration.

    7. A01CFEU

      Engage the 6 claws to close the 2 covers as shown in the illustration.

  2. INSPECT REAR SEAT SLIDE ADJUSTER LOCK


    1. During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the bolts securing the seat to adjust the adjuster position.

  3. INSTALL REAR SEAT LEG COVER


    1. A01CEVN

      Engage the 5 claws and the guide to install the rear seat leg cover.

  4. INSTALL REAR SEAT LOWER CUSHION SHIELD


    1. A01CD5A

      Engage the claw and the guide to install the rear seat lower cushion shield as shown in the illustration.

  5. INSTALL REAR SEAT HEADREST ASSEMBLY

  6. INSPECT REAR NO. 1 SEAT ASSEMBLY


    1. Inspect the power seat operation Click here.