REAR NO. 1 SEAT ASSEMBLY (for Power Seat) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT LOWER CUSHION SHIELD


    1. A01CCDI

      Disengage the claw and the guide and remove the rear seat lower cushion shield as shown in the illustration.

  3. REMOVE REAR SEAT LEG COVER


    1. A01CEVN

      Disengage the 5 claws and the guide and remove the rear seat leg cover.

  4. REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. Operate the ottoman switch to fully raise the ottoman.

    2. A01CAUUE01

      Using a screwdriver wrapped with protective tape, disengage the 6 claws and open the 2 covers as shown in the illustration.

    3. A01CDAHE02

      Using a screwdriver wrapped with protective tape, disengage the 6 claws and open the 2 covers as shown in the illustration.

    4. Operate the power seat switch and move the seatback to the fully folded position.

    5. A01CCPR

      Remove the 4 bolts.

    6. Remove the nut and disconnect the wiring harness protector set.

    7. Disconnect each connector.

    8. Remove the rear No. 1 seat assembly.

      Note

      Be careful not to damage the vehicle body.