REAR NO. 1 SEAT ASSEMBLY (for Manual Seat) INSTALLATION


  1. INSTALL REAR NO. 1 SEAT ASSEMBLY


    1. Place the rear No. 1 seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01CE9FE01

      Temporary install the rear No. 1 seat assembly with the 4 bolts.

    3. Tighten the bolt (1).

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    4. Tighten the bolt (2).

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    5. Slide the rear No. 1 seat assembly rearward.

    6. Tighten the bolt (3).

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    7. Slide the rear No. 1 seat assembly inward.

    8. Tighten the bolt (4).

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

      Note

      During the sliding operation of the rear No. 1 seat assembly, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat fixation bolts to adjust the adjuster position.

    9. A01CDBN

      Engage the 6 claws to close the 2 covers.

    10. A01CC3Y

      Engage the 4 claws to close the 2 covers.

  2. INSTALL REAR SEAT LOWER CUSHION SHIELD


    1. A01CD5A

      Engage the guide.

    2. Engage the claw to install the rear seat lower cushion shield as shown in the illustration.

  3. INSTALL REAR SEAT HEADREST ASSEMBLY