FRONT SEAT CUSHION HEATER (for Driver Side) INSPECTION


  1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01CCKRE01

      Measure the resistance according to the value(s) in the table below.

      OK
      Connection Condition Specified Condition
      1 (HI) - 3 (E) Seat back heater temperature 25 °C (77°F) 2.1 to 2.5 Ω
      1 (HI) - 2 (LO) Seat back heater temperature 25 °C (77°F) Below 1 Ω
      Text in Illustration
      *1

      Component without harness connected

      (Separate Type Front Seat Cushion cover)

      Note

      Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.

      If the result is not as specified, replace the separate type front seat cushion cover.