DESCRIPTION
for LHD:
The front passenger side - side collision sensor circuit (to determine deployment of the front seat side airbag assembly RH and curtain shield airbag assembly RH) is composed of the center airbag sensor assembly, side airbag sensor RH (for front side), rear airbag sensor RH, side airbag sensor RH (for rear side) and front floor airbag sensor.
for RHD:
The driver side - side collision sensor circuit (to determine deployment of the front seat side airbag assembly RH and curtain shield airbag assembly RH) is composed of the center airbag sensor assembly, side airbag sensor RH (for front side), rear airbag sensor RH, side airbag sensor RH (for rear side) and front floor airbag sensor.
The front floor airbag sensor detects impacts to the vehicle and sends signals to the center airbag sensor assembly to determine if the airbag should be deployed.
DTC B1665/17 is recorded when a malfunction is detected in the front floor airbag sensor.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1665/17 |
|
|
WIRING DIAGRAM
Refer to DTC B1622/81 Click here.
INSPECTION PROCEDURE
PROCEDURE
CHECK FRONT FLOOR AIRBAG SENSOR
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the rear floor airbag sensor with the front floor airbag sensor and connect the connectors.
Connect the cable to the negative (-) battery terminal.
Turn the engine switch on (IG), and wait for at least 60 seconds.
Clear the DTCs stored in the memory Click here.
Turn the engine switch off.
Turn the engine switch on (IG), and wait for at least 60 seconds.
Check for DTCs Click here.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Tech Tips
Codes other than DTCs B1665/17 and B1675/18 may be output at this time, but they are not related to this check.
| B |
|
REPLACE FRONT FLOOR AIRBAG SENSOR Click here |
| C |
|
USE SIMULATION METHOD TO CHECK Click here |
| A |
|
REPLACE CENTER AIRBAG SENSOR ASSEMBLY Click here