TRIP SWITCH REMOVAL


  1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL


    1. Operate the tilt lever to lower the steering wheel assembly.

    2. A01CDZ6E01

      Apply protective tape to the areas shown in the illustration.

    3. A01CBPO

      Disengage the 4 claws.

    4. A01CAPR

      Disengage the 7 claws and 2 guides to remove the No. 1 instrument cluster finish panel.

  2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. A01CDHT

      Disengage the 4 claws.

    2. Disconnect the connector and remove the No. 1 instrument cluster finish panel garnish.

  3. REMOVE TRIP SWITCH ASSEMBLY


    1. A01CC5B

      Disengage the 2 claws and remove the trip switch assembly.