COMBINATION METER REMOVAL


  1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL


    1. Operate the tilt lever to lower the steering wheel assembly.

    2. A01CDZ6E01

      Apply protective tape to the areas shown in the illustration.

    3. A01CBPO

      Disengage the 4 claws.

    4. A01CAPR

      Disengage the 7 claws and 2 guides to remove the No. 1 instrument cluster finish panel.

  2. REMOVE COMBINATION METER ASSEMBLY


    1. A01CELM

      Disengage the 4 claws.

    2. A01CDME

      Pull the combination meter assembly, disconnect the connector, and remove the combination meter assembly as shown in the illustration.

      Note

      When removing the combination meter assembly, do not damage the upper instrument panel sub-assembly and combination meter assembly.