BACK DOOR COURTESY SWITCH INSPECTION


  1. INSPECT BACK DOOR COURTESY SWITCH (BACK DOOR LOCK ASSEMBLY) (w/o Power Back Door)


    1. A01CD46E10

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (ACT-) - 3 (D+) Locked 10 kΩ or higher
      Unlocked Below 1 Ω

      If the result is not specified, replace the back door lock assembly.

  2. INSPECT BACK DOOR COURTESY SWITCH (BACK DOOR LOCK ASSEMBLY) (w/ Power Back Door)


    1. Measure the resistance according to the value(s) in the table below.

      A01CFLPE13
      Standard Resistance
      Tester Connection Door Lock Latch Position Specified Condition
      3 (CTY) - 4 (E) Open-latch Below 1 Ω
      3 (CTY) - 4 (E) Half-latch Below 1 Ω
      3 (CTY) - 4 (E) Full-latch 10 kΩ or higher
      3 (CTY) - 4 (E) Over-latch 10 kΩ or higher

      If the result is not specified, replace the back door lock assembly.