AIRBAG SYSTEM CHECK MODE PROCEDURE


  1. CHECK MODE (SIGNAL CHECK): DTC CHECK


    1. Turn the engine switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the engine switch on (IG) and turn the tester on.

    4. Select "SIGNAL CHECK", and proceed with checking using the intelligent tester.

      Note

      Select "SIGNAL CHECK" from the "DTC CHECK" screen displayed on the intelligent tester to clear the output DTCs (both present and past).

      Tech Tips


      • DTCs can be detected more sensitively in check mode than in normal diagnosis mode.

      • Perform check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.