INSTALL INTERIOR ILLUMINATION LIGHT ASSEMBLY RH (for RHD)
Engage the 2 claws to install the interior illumination light assembly RH.
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
Engage the 2 claws and DLC3.
Engage the clamp.
Connect the connector.
Engage the 2 claws and 2 guides.
Note
Make sure that the claws are fully engaged.
Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <B>.
INSTALL INTERIOR ILLUMINATION LIGHT ASSEMBLY LH (for LHD)
Engage the 2 claws to install the interior illumination light assembly LH.
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
Engage the clamp.
Connect each connector.
Engage the 2 claws and guide.
Note
Make sure that the claws are fully engaged.
Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <B>.
INSTALL INTERIOR ILLUMINATION LIGHT ASSEMBLY LH (for RHD)
Engage the 2 claws to install the interior illumination light assembly LH.
INSTALL INTERIOR ILLUMINATION LIGHT ASSEMBLY RH (for LHD)
Engage the 2 claws to install the interior illumination light assembly RH.
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Connect the connector.
Engage the 2 guides.
Engage the 4 claws to install the No. 2 instrument panel under cover sub-assembly.
Note
Make sure that the claws are fully engaged.
INSTALL CENTER FLOOR CARPET COVER LH (for RHD)
Engage the 4 claws.
Install the center floor carpet cover LH with the clip.
INSTALL CENTER FLOOR CARPET COVER RH (for LHD)
Engage the 5 claws.
Install the center floor carpet cover RH with the clip.