GLOVE BOX LIGHT INSPECTION


  1. INSPECT GLOVE BOX LIGHT ASSEMBLY


    1. A01CCK9E02

      Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.

    2. Check that the glove box light comes on.

      OK
      Glove box light comes on.

      If the result is not as specified, replace the glove box light assembly.

  2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for LH Side)


    1. A01CCK9E05

      Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.

    2. Check that the light comes on.

      OK
      No. 1 interior illumination light comes on.

      If the result is not as specified, replace the No. 1 interior illumination light assembly.

  3. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Center)


    1. A01CCK9E05

      Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.

    2. Check that the light comes on.

      OK
      No. 1 interior illumination light comes on.

      If the result is not as specified, replace the No. 1 interior illumination light assembly.