LIGHTING SYSTEM Door LOCK Position Circuit

DESCRIPTION

The main body ECU receives door unlock detection switch signals to control the illuminated entry system.

WIRING DIAGRAM


  1. for RHD

    A01CCY9E01

  2. for LHD

    A01CCY9E03

INSPECTION PROCEDURE

PROCEDURE


  1. READ VALUE USING INTELLIGENT TESTER


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. Read the display on the intelligent tester.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D-Door Lock Pos SW Driver side door unlock detection switch signal / ON or OFF

      ON: Driver side door unlocked

      OFF: Driver side door locked

      		 -
      P-Door Lock Pos SW Front passenger side door unlock detection switch signal / ON or OFF

      ON: Front passenger side door unlocked

      OFF: Front passenger side locked

      		 -
      RL-Door Lock Pos SW Slide door unlock detection switch LH signal / ON or OFF

      ON: Slide door LH unlocked

      OFF: Slide door LH locked

      		 -
      RR-Door Lock Pos SW Slide door unlock detection switch RH signal / ON or OFF

      ON: Slide door RH unlocked

      OFF: Slide door RH locked

      		 -
      OK
      Normal conditions listed above are displayed.

    NG

    GO TO POWER DOOR LOCK CONTROL SYSTEM Click here

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here