LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Back Door / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Engine switch/ON (ACC) or OFF

      ON: Engine switch on (ACC or IG)

      OFF: Engine switch off

      		 -
      IG SW Engine switch/ON (IG) or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 -
      D Door Courtesy SW Driver side door courtesy switch/ON or OFF

      ON: Driver side door open

      OFF: Driver side door closed

      		 -
      P Door Courtesy SW Front passenger side door courtesy switch/ON or OFF

      ON: Front passenger side door open

      OFF: Front passenger side door closed

      		 -
      RR Door Courtesy SW Slide door courtesy switch RH/ON or OFF

      ON: Slide door LH open

      OFF: Slide door LH closed

      		 -
      RL Door Courtesy SW Slide door courtesy switch LH/ON or OFF

      ON: Slide door LH open

      OFF: Slide door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy switch/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      D-Door Lock Pos SW Driver side door lock position switch/ON or OFF

      ON: Driver side door unlocked

      OFF: Driver side door locked

      		 -
      P-Door Lock Pos SW Front passenger side door lock position switch/ON or OFF

      ON: Front passenger side door unlocked

      OFF: Front passenger side door locked

      		 -
      RR-Door Lock Pos SW Slide door RH lock position switch/ON or OFF

      ON: Slide door RH unlocked

      OFF: Slide door RH locked

      		 -
      RL-Door Lock Pos SW Slide door LH lock position switch/ON or OFF

      ON: Slide door LH unlocked

      OFF: Slide door LH locked

      		 -
      Ceiling Light SW Front ceiling light switch/ON or OFF

      ON: Front ceiling light switch pushed

      OFF: Front ceiling light switch not pushed

      		 -
      Rear Ceiling Light SW Rear ceiling light switch/ON or OFF

      ON: Rear ceiling light switch pushed

      OFF: Rear ceiling light switch not pushed

      		 -
      Back Door
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Courtesy Switch Signal Back door courtesy switch/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System Front personal light, room light LH, room light RH and engine switch illumination ON/OFF The light switch in the DOOR position and all doors are closed
      Indicator for Lighting Engine switch illumination ON/OFF All doors are closed
      Ceiling Light Ceiling lights ON/OFF -
      Step Light Operation Footwell lights ON/OFF -