SMART ENTRY AND START SYSTEM (for Start Function) CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH THE INTELLIGENT TESTER

    Tech Tips

    The items in the table below can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Entry & Start / Utility / Customize Setting.

    5. Select the setting by referring to the table below.

      Entry & Start
      Tester Display Default Content Setting
      Ignition Available Area ALL Function that switches the entry ignition detection area FRONT or ALL

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (W/ NAVIGATION SYSTEM (for HDD))


    1. Turn the engine switch on (IG).

    2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Door lock settings.

    3. Select the setting by referring to the table below.

      Tester Display Default Content Setting
      Entry and start system On Function that enables or disables the smart entry and start system. On or Off