SMART ENTRY AND START SYSTEM (for Entry Function) CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The items in the table below can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Entry & Start / Utility / Customize Setting.

    5. Select the setting by referring to the table below.

      Entry & Start
      Tester Display Default Content Setting
      Ignition Available Area ALL Function that switches the entry ignition detection area FRONT or ALL
      Park Wait Time 2.5s Function to set waiting time to permit opening door after door is locked with entry lock function 0.5 s, 1.5 s, 2.5 s or 5 s
      Back Door Opening Operation LONG Function to open the back door when the driver has the electrical key and presses back door opener switch assembly (opener switch) LONG, TWICE or OFF
      Key Low Battery Warning ON Function to warn driver that key battery is low ON or OFF

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (W/ NAVIGATION SYSTEM (for HDD))


    1. Turn the engine switch on (IG).

    2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Door lock settings.

    3. Select the setting by referring to the table below.

      Tester Display Default Content Setting
      Entry and start system On Function that enables or disables the smart entry and start system. On or Off

  3. Electrical Key Cancel

    The electrical key cancel operation disables the following functions:


    • Entry Unlock/Lock

    • Entry Ignition

    • Entry Back Door Open

    • Electrical Key Lock-in Prevention

    • Warning

    • Memory Call


    1. The operation procedures are as follows:

      Precondition:

      Engine switch off, driver side door closed and unlocked.


      1. Unlock the driver side door once with the UNLOCK switch of the electrical key.

      2. Open the driver door within 5 seconds.

      3. Unlock the driver side door twice with the UNLOCK switch of the electrical key within 5 seconds.

      4. Close and open the driver door twice within 30 seconds.

        (Driver door: Close → Open → Close → Open)

      5. Unlock the driver side door twice with the UNLOCK switch of the electrical key within 5 seconds.

      6. Close and open the driver door within 30 seconds.

        (Driver door: Close → Open)

      7. Close the driver door within 5 seconds.

        When electrical key cancel is activated, the wireless door lock buzzer sounds twice.

        To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.