POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK


  1. CHECK POWER DOOR LOCK OPERATION

    Note

    The operation check below is based on the non-customized initial condition of the vehicle.


    1. Check basic functions.


      1. Check that all doors lock when the lock side of the door lock control switch (for manual operation) is pressed lock and all doors unlock when the unlock side is pressed.

      2. Check that all doors lock when the driver door lock key cylinder is turned to lock using the key.

      3. Check that all doors unlock when the driver door lock key cylinder is turned to unlock using the key.

    2. Check the key lock-in prevention function.

      Note

      In order to prevent the key from being locked in, the following inspection should be performed with the driver door glass open.


      1. Turn the engine switch on (IG) or (ACC).

      2. With the driver side door open, check that all doors unlock immediately after the door lock knob for the driver side door is locked.

      3. With the driver side door open, check that all doors unlock immediately after the unlock side of the door control switch (for manual operation) is pressed.

      4. With the driver side door open, lock the driver side door lock knob and hold it for 2 seconds or more, then close the driver side door and check that all doors unlock.

    3. Check the security function of the door lock control system.


      1. Close all doors and leave the driver door glass open so that the door control switch can be operated from outside the vehicle. (Step 1)

      2. Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the lock knob. Hold the outside handle of the driver door open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the door lock control switch (for manual operation) is pressed from outside the vehicle.

      3. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door lock control switch (for manual operation) is pressed from outside the vehicle.

      4. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless door lock or entry lock operation. Then, check that the doors do not unlock when the unlock side of the door lock control switch (for manual operation) is pressed from outside the vehicle.

        Tech Tips

        Check that the security function of the door lock control system is canceled under the following conditions:


        • The engine switch is turned on (IG).

        • The driver side is unlocked using the key.

        • The door control switch (for manual operation) is turned to unlock after the door lock knob is unlocked manually.

        • The doors are unlocked by wireless operation.

    4. Check the illumination function.


      1. Set the switch for the personal lights switch to the door position.

      2. With all doors locked, check that the driver door unlocks when the driver door lock cylinder is turned to unlock using the key and that the interior light turns on.

      3. Check that the interior light turns off in approximately 15 seconds* if the doors have not been opened.

        Tech Tips

        *: This function can be customized.

    5. Check the driver door-linked automatic door unlock function.

      Tech Tips

      The default setting for the driver door-linked automatic door unlock function is off. If necessary, the function must be set to on through the customize function.


      1. When the driver door is closed, turning the engine switch from on (IG) to off and opening the driver door within 10 seconds will automatically unlock all doors.

    6. Check the shift linked automatic door lock function.

      Tech Tips


      • The default setting for the shift linked automatic door lock function is off. If necessary, the function must be set to on through the customize function.

      • The automatic locking operation is disabled if the crash detection sensor (built into the center airbag sensor) unlocking system malfunctions when the engine switch is on (IG) and all doors are closed.


      1. When the engine switch is on (IG) and the shift lever is moved from P to any position other than P, check that all doors lock automatically.

    7. Check the shift linked automatic door unlock function.

      Tech Tips

      The default setting for the driver door-linked automatic door unlock function is off. If necessary, the function must be set to on through the customize function.


      1. When the engine switch is on (IG) and the shift lever is moved to P from any position other than P, check that all doors unlock automatically.

    8. Check the speed-sensitive automatic door lock function.


      1. When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors automatically lock at once (automatic door lock).

        Tech Tips


        • The default setting for the shift linked automatic door unlock function is on. If necessary, the function must be set to off through the customize function.


        • The automatic locking operation is disabled if the crash detection sensor (built into the center airbag sensor) unlocking system has a malfunction when the engine switch is on (IG) and all doors are closed.