POWER DOOR LOCK CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Master Switch / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Main Body (Main Body ECU (Passenger Side Junction Block Assembly))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door Courtesy SW Driver door courtesy switch signal/ON or OFF

      ON: Driver door open

      OFF: Driver door closed

      		 -
      P Door Courtesy SW Front passenger door courtesy light switch signal/ON or OFF

      ON: Front passenger door open

      OFF: Front passenger door closed

      		 -
      RR Door Courtesy SW Rear right door courtesy switch signal/ON or OFF

      ON: Rear right door open

      OFF: Rear right door closed

      		 -
      RL Door Courtesy SW Rear left door courtesy switch signal/ON or OFF

      ON: Rear left door open

      OFF: Rear left door closed

      		 -
      Back Door Courtesy SW Back door courtesy switch signal/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      D-Door Lock Pos SW Driver door lock position switch signal/ON or OFF

      ON: Driver door unlocked

      OFF: Driver door locked

      		 -
      P-Door Lock Pos SW Front passenger door lock position switch signal/ON or OFF

      ON: Front passenger door unlocked

      OFF: Front passenger door locked

      		 -
      Door Key SW-Lock Front door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF

      ON: Front door key cylinder turned to lock position

      OFF: Front door key cylinder turned to unlock position

      		 -
      Door Key SW-Unlock Front passenger door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF

      ON: Front passenger door key cylinder turned to unlock position

      OFF: Front passenger door key cylinder turned to lock position

      		 -
      Back Door Open Handle SW Back door open handle signal/ON or OFF

      ON: Back door open handle pushed

      OFF: Back door open handle free

      		 -
      RR-Door Lock Pos SW Side door RH lock position switch signal/ON or OFF

      ON: Slide door RH unlocked

      OFF: Slide door RH locked

      		 -
      RL-Door Lock Pos SW Slide door LH lock position switch signal/ON or OFF

      ON: Slide door LH unlocked

      OFF: Slide door LH locked

      		 -
      Back Door Open PERMIT / PROHIBIT

      PERMIT: Back door open available

      PROHIBIT: Back door open unavailable

      		 -
      Auto Lock Speed-sensitive automatic door lock function/ON or OFF Customized value displayed -
      Auto Lock/Shift Shift-linked automatic door lock function/ON or OFF Customized value displayed -
      Auto Unlock/Shift Shift-linked automatic door unlock function/ON or OFF Customized value displayed -
      All Unlock/Open-Close Driver door-linked automatic door unlock function/ON or OFF Customized value displayed -
      Master Switch (Multiplex Network Master Switch Assembly)
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Door Lock Switch Status Driver side door control switch lock signal/ON or OFF

      ON: Door control switch pushed to lock position

      OFF: Door control switch not pushed to lock position

      		 -
      Door Unlock Switch Status Driver side door control switch unlock signal/ON or OFF

      ON: Door control switch pushed to unlock position

      OFF: Door control switch not pushed to unlock position

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Main Body (Main Body ECU (Passenger Side Junction Block Assembly))
      Tester Display Test Part Control Range Diagnostic Note
      Door Lock Door lock motor LOCK/UNLOCK -
      Shock Detection Unlock Door lock motor ON/OFF -