Click here

GENERATOR REPLACEMENT

Click here
Click here Click here
  1. Click here

    REPLACE GENERATOR DRIVE END FRAME BEARING


    1. A01CFET

      Remove the 4 screws and retainer plate from the drive end frame.

    2. A01CDUXE01

      Using SST and a hammer, tap out the drive end frame bearing from the drive end frame.

      09950-60010 09951-00250
      09950-70010 09951-07100
    3. A01CBQOE01

      Using SST and a press, press in a new generator drive end frame bearing.

      09950-60010 09951-00470
      09950-70010 09951-07100
    4. A01CED4E04

      Fit the tabs on the retainer plate into the cutouts on the drive end frame to install the retainer plate.

      Table 1. Text in Illustration
      *1 Tab
      *2 Cutout

    5. Install the 4 screws.

      2.3 N*m 23 kgf*cm 20 in.*lbf