CLEARANCE SONAR MAIN SWITCH INSPECTION


  1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (CLEARANCE SONAR MAIN SWITCH)


    1. A01CBEZE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      G31-7 (IG) - G31-8 (ECU) Clearance sonar main switch is pushed Below 1 Ω
      G31-7 (IG) - G31-8 (ECU) Clearance sonar main switch is not pushed 10 kΩ or higher

      If the result is not as specified, replace the integration control and panel assembly (clearance sonar main switch).