MAIN BODY ECU INSTALLATION


  1. INSTALL MAIN BODY ECU (PASSENGER SIDE JUNCTION BLOCK ASSEMBLY) (for RHD)


    1. A01CGFX

      Engage the claw and guide to install the main body ECU (passenger side junction block assembly) to the junction block bracket.

    2. A01CGHN

      Connect each back side connector and install the junction block assembly with bracket as shown in the illustration.

      Note

      Be sure to engage each connector securely.

    3. A01CB9B

      Install the bolt and nut.

    4. A01CD8Y

      Engage the 2 clamps.

    5. A01CC10

      Engage the 2 claws and 2 guides to connect the fusible link block assembly.

    6. A01CCZX

      Engage the claw and clamp.

    7. A01CFFVE01

      Connect each front side connector.

      Note

      Be sure to engage each connector securely.

    8. Connect connector A as shown in the illustration.

      Note

      Be sure to engage connector A securely.

  2. INSTALL MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY) (for LHD)

    Tech Tips

    Use the same procedure for the main body ECU (driver side junction block assembly) and main body ECU (passenger side junction block assembly).

  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here