CLEARANCE WARNING BUZZER (for LHD) REMOVAL


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01CD4S

      Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01CG21E02

      Apply protective tape to the area shown in the illustration.

    2. A01CEQF

      Move the shift lever to N.

    3. Disengage the 3 claws as shown in the illustration.

      Note

      Make sure to disengage the lower claws first. The center instrument cluster finish panel sub-assembly may be damaged if the upper claws are disengaged first.

    4. A01CCCC

      Disengage the 20 claws.

      Note

      Make sure to disengage the lower claws first. The center instrument cluster finish panel sub-assembly may be damaged if the upper claws are disengaged first.

    5. Disconnect the connector and remove the center instrument cluster finish panel sub-assembly.

  3. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A01CEYM

      Disengage the 4 claws and remove the air conditioning control assembly.

    2. Disconnect the connector.

  4. REMOVE CLEARANCE WARNING BUZZER


    1. A01CFXT

      Disconnect the connector.

    2. Disengage the clamp and remove the clearance warning buzzer.