ULTRASONIC SENSOR (for Rear Side) INSTALLATION


  1. INSTALL NO. 2 ULTRASONIC SENSOR BEZEL (for Corner Sensor)


    1. A01CC8IE01
      Text in Illustration
      *a Keyhole
      *b Slit

      Engage the 4 claws and install the No. 2 ultrasonic sensor bezel to the rear bumper assembly.

      Tech Tips


      • When installing the retainer, align the keyhole and slit as shown in the illustration.

      • The illustration is for the RH side. The orientation for the LH side is the opposite of the RH side.

  2. INSTALL NO. 1 ULTRASONIC SENSOR (for Corner Sensor)


    1. for LH side:


      1. A01CCTM

        Engage the claw to install the ultrasonic sensor clip to the No. 1 ultrasonic sensor assembly.

    2. Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 2 ultrasonic sensor bezel.

      Tech Tips

      The orientation for the LH side is the opposite of the RH side.

    3. Connect the connector.

    4. for LH side:


      1. Engage the clamp.

  3. INSTALL NO. 3 ULTRASONIC SENSOR BEZEL (for Back Sensor)


    1. A01CBJEE01
      Text in Illustration
      *a Keyhole
      *b Slit

      Engage the 4 claws and install the No. 3 ultrasonic sensor bezel to the rear bumper assembly.

      Tech Tips

      When installing the retainer, align the keyhole and slit as shown in the illustration.

  4. INSTALL NO. 1 ULTRASONIC SENSOR (for Back Sensor)


    1. Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 3 ultrasonic sensor bezel.

    2. Connect the connector.

  5. INSTALL REAR BUMPER ASSEMBLY

    Click here