ULTRASONIC SENSOR (for Front Side) INSTALLATION

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the RH side.


  1. INSTALL NO. 1 ULTRASONIC SENSOR BEZEL


    1. A01CC8IE01
      Text in Illustration
      *a Keyhole
      *b Slit

      Engage the 4 claws and install the No. 1 ultrasonic sensor bezel to the front bumper assembly.

      Tech Tips

      When installing the retainer, align the keyhole and slit as shown in the illustration.

  2. INSTALL NO. 1 ULTRASONIC SENSOR


    1. Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor bezel.

    2. Connect the connector.

  3. INSTALL FRONT BUMPER ASSEMBLY