ULTRASONIC SENSOR (for Front Side) REMOVAL

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the RH side.


  1. REMOVE FRONT BUMPER ASSEMBLY


  2. REMOVE NO. 1 ULTRASONIC SENSOR


    1. A01CFDI

      Disconnect the connector.

    2. A01CEFS

      Disengage the 2 claws and remove the No. 1 ultrasonic sensor from the No. 1 ultrasonic sensor bezel.

  3. REMOVE NO. 1 ULTRASONIC SENSOR BEZEL


    1. A01CG3Y

      Disengage the 4 claws and remove the No. 1 ultrasonic sensor bezel from the front bumper assembly.