NAVIGATION SYSTEM Disc cannot be Ejected

INSPECTION PROCEDURE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System Click here.

PROCEDURE


  1. CHECK OPERATION


    1. Press the disc eject switch of the navigation ECU sub-assembly for 5 seconds or more and check that the disc is ejected.

      OK
      Disc is ejected.

    NG

    REPLACE NAVIGATION ECU SUB-ASSEMBLY Click here

    OK

  2. REPLACE DISC AND RECHECK


    1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Disc is ejected.

    NG

    REPLACE NAVIGATION ECU SUB-ASSEMBLY Click here

    OK

    DISC WAS FAULTY