DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15C0 | Navigation antenna error |
|
| B15C1 | Error of the power source to the navigation antenna |
INSPECTION PROCEDURE
Note
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System Click here.
PROCEDURE
CHECK CONNECTION OF NAVIGATION ANTENNA CORD
Check if the navigation antenna cord is securely connected to the navigation ECU sub-assembly.
| OK |
|---|
| Navigation antenna cord is securely connected. |
| NG |
|
SECURELY CONNECT NAVIGATION ANTENNA CORD |
| OK |
|
REPLACE NAVIGATION ANTENNA ASSEMBLY
Replace the navigation antenna assembly Click here.
Clear the DTCs Click here.
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
| NG |
|
REPLACE NAVIGATION ECU SUB-ASSEMBLY Click here |
| OK |
|
END